Cleveland's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across Ohio.
Professional roofing, coating, and insulation services for Cleveland property owners and facility managers.
Preventive roof maintenance programs with scheduled inspections, drain cleaning, minor repairs, and detailed photo-documented condition reports. Catch small problems before they become expensive emergencies.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
Spray foam insulation for crawl space walls, rim joists, and band boards that eliminates moisture, cold floors, and musty odors. Closed-cell foam acts as both insulation and vapor barrier in a single application.
Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Complete roof restoration with spray foam and protective coatings that add 20 or more years of life to your existing roof — without the cost, waste, and disruption of a full tear-off and replacement.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Silicone coatings provide the longest service life of any roof coating product. Our crews apply them over metal, TPO, EPDM, built-up, and spray foam surfaces — sealing the entire roof in a seamless, reflective, waterproof membrane.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.
Roof leaks get worse with every rain. Our crews respond fast, identify the exact source using infrared and moisture mapping, and apply permanent repairs using spray foam and coating systems designed for long-term performance.
When restoration is not enough, our crews perform complete roof tear-off and replacement with modern spray foam roofing systems. Full deck inspection, substrate repair, SPF application, and protective coating — all warranted.
Closed-cell and open-cell spray foam attic insulation that eliminates air infiltration and creates a continuous thermal barrier from ridge to eave. Most projects completed in a single day with immediate comfort improvement.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
The Cleveland metro area contains some of the highest energy costs per square foot in Ohio. Lapolla Industries addresses this with spray polyurethane foam — the most thermally efficient roofing and insulation system available. Our SPF installations across the Cleveland area consistently deliver 25 to 40 percent reductions in HVAC energy consumption for commercial and residential properties alike.
What makes spray foam different from every other insulation material is its dual role as both insulator and air barrier. In Cleveland buildings where air leakage through conventional assemblies can account for 40 percent of total energy loss, a spray foam system pays for itself through savings alone — often within 3 to 5 years. Lapolla Industries has the Ohio track record to prove it.
Here is what sets Lapolla Industries apart from other contractors in Cleveland.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
SPF roofing and coating can be applied over existing roof systems without tear-off — no demolition noise, no debris, and no business interruption during installation.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
Common questions about spray foam roofing and insulation in Cleveland, OH.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Cleveland. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Cleveland roof with drainage challenges or heavy weather exposure.
Spray foam is one of the best solutions for flat and low-slope roofs in Cleveland. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Cleveland homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Cleveland we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Spray foam insulation costs in Cleveland typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Cleveland homeowners see a full return on investment through energy savings within 3 to 5 years.
A properly installed SPF roof in Cleveland can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Real reviews from property owners we have served across the country.
"Called about cracks forming in our spray foam roof coating. Lapolla Industries came out, assessed the damage, and recoated the affected areas. The repair blended seamlessly with the existing surface. Fair pricing too."
"Got a comprehensive inspection done on our warehouse roof. They found three areas of trapped moisture that were invisible from the surface. The early detection saved us from much more expensive structural repairs down the road."
"We signed up for their annual roof maintenance program for our three commercial buildings. They catch small issues before they become expensive repairs. Last inspection they found a failing pipe boot that would have caused a major leak."
Lapolla Industries proudly serves property owners in these cities near Cleveland.